09-27-2011 02:24 AM
i have a case where the client change the RMX 1500 password and forget what is, i cant access the RMX by any way. is there a procedure to restore the password? thanks...
Solved! Go to Solution.
09-28-2011 05:51 AM
If you do not know any of the account passwords to access the RMX then the only way to reset the password is to factory default the box. This will put the POLYCOM // POLYCOM user back on it.
To perform the default, you neet a USB drive of 2GB or less, and you put a blank text file onto the root directory called RestoreToFactoryDefault.txt along with a lan.cfg file containing your management and shelf management IP addresses (created with the lan config utility on the usb drive that ships with the system).
That will also erase all of the configuration on the box however, but it is the only way to recover the password if you have lost all of your credentials to log in.
10-04-2012 08:28 AM
welcome to the Polycom Community.
The RMX 1500 and other RMX support pages hold a copy of the USB stick that is delivered usually with the System.
For a RMX1500 you can find this => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a web service request or call us .
Above is necessary in order to track issue internally within Polycom.
Please ensure to always check the VoIP FAQ , PSTN FAQ or RPM FAQ
If you find my post helpful, and it answers your question, please mark it as an "Accepted Solution" and feel free to give me Kudos.