01-30-2012 04:28 AM
Has anyone experience to connect the KWS6000 with an optical signaler?
Witch product can do this?
Otherwise i need to look for a solution to connect a device via an analog Port of the Cisco UC540.
I can test at the moment only with a KWS600v3 with a cordless DECT Ringer (Topcom Butler S100).
This device will register as unknown device on KWS600v3,but it doesn't rings on calls.
Solved! Go to Solution.
01-30-2012 04:50 AM - edited 01-30-2012 04:53 AM
if the device is an unknown device then something in the registration has gone wrong.
Did you supply a PIN or does the KWS600v3 require a PIN?
According to it's User Guide the Unit requires a PIN of 0000 or 1111 as described => here <=
Usually 3rd Party DECT Devices like compatible GAP Phones sometime require a PIN and this needs to be setup on the KWS to be requested or the registration will fail.
Please provide more feedback or try to work through your Distributor directly with Polycom KIRK in Denmark.
Polycom Global Services
The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a web service request or call us .
Above is necessary in order to track issue internally within Polycom.
Please ensure to always check the VoIP FAQ , PSTN FAQ or RPM FAQ
If you find my post helpful, and it answers your question, please mark it as an "Accepted Solution" and feel free to give me Kudos.