11-08-2011 12:12 PM
I need to change gateway settting for LAN and cannot find it in the configuration menu.
The only setting/change I find is the WAN configuration.
Can anyone help?
07-11-2012 08:55 AM
The VBP can only have one gateway address which is associated to the WAN IP address in the web GUI. For the LAN side, you have to add a route using the LAN gateway. Without any routes, the VBP will reach any device ont he same subnet as the LAN side IP address. Adding routes (System > Routes) will give the VBP the ability to reach your other LAN subnets.
I have included a screenshot of my VBP which shows some of my subnets.