09-28-2014 08:49 AM
Having a dumb moment but I cannot work out the cabling to connect a Soundstructure C16 (with 4 HDX ceiling Mics) to a Cisco C40.
The issue I seem to be having a blank with is the Cisco audio output is via HDMI to the amp, not the rca etc), so at the moment I just have a single phoenix to XLR connection from the output 1 on the C16, to the Mic input of the Cisco. I have nothing from the C16 to the amp.
There seems to be very little information from Polycom on the physical connections, lots of info on programming, but if I dont get the cabling right then programming is pointless!
Can somebody save my sanity!?!?