Reply
Occasional Visitor
Posts: 1
0

Soundstructure and Cisco Codec

Hi guys,

 

Having a dumb moment but I cannot work out the cabling to connect a Soundstructure C16 (with 4 HDX ceiling Mics) to a Cisco C40.

 

The issue I seem to be having a blank with is the Cisco audio output is via HDMI to the amp, not the rca etc), so at the moment I just have a single phoenix to XLR connection from the output 1 on the C16, to the Mic input of the Cisco. I have nothing from the C16 to the amp.

 

There seems to be very little information from Polycom on the physical connections, lots of info on programming, but if I dont get the cabling right then programming is pointless!

 

Can somebody save my sanity!?!? 

 

Thanks.

Trusted Contributor
Posts: 160
0

Re: Soundstructure and Cisco Codec

Please refer to the specifications toward the end of this document:  SoundStructure Design Guide