Reply
Occasional Visitor
Posts: 1
0

Test Mics option for Polycom Soundstructure DSP

I was able to do a test mics option with Biamp DSP, where the Biamp will send serial strings based on if the mics are working or not when a pink noise is generated. The third party controllers like AMX or Crestron will be able to then display if the mics are working or not.

 

I need to do the same with Polycom Soundstructure and i am not able to figure if there is any option available to achieve this. A client was able to achieve this functionality for a previous site so i have to figure out what method he had used.

 

 

I was not able to find a query commands for the DSP to show MICS clip levels when the pink noise is generated, so i am open to any ideas.