Reply
Frequent Visitor
bdale

Can't dial IP addresses containing a zero, or DNS names

Hi Guys.

 

Great app, but I've found a couple of bugs (version 1.0.2-11459_2875 and the previous version too):

 

When the client is unregistered from CMA (eg: making direct H.323 calls), dialling any IP address that contains a zero in any octet causes tha call not to dial and "Invalid IP Address" to be displayed. For example:

 

10.0.0.1 - Invalid IP Address

203.0.1.2 - Invalid IP Address

10.1.0.4 - Invalid IP Address

10.1.1.4 - Dials normally

 

Also, when making a connection to any FQDN, the address does not resolve eg: calls to video.mycompay.com return Invalid IP Address, but calls direct to the IP Address (as long as it has no zeros in it) connect fine.

 

Cheers,

 

Ben

Polycom Employee & Moderator
Marcux

Re: Can't dial IP addresses containing a zero, or DNS names

Hi Ben, Call will not be resolved by Realpresence. They are resolved throught the gatekeeper, so you'll have to have a gatekeeper set up to resolve them. Also, I don't seem to have the problem with zeros, I've just tried a call to 192.168.0.5 and it works correctly.  Is there anything between you and you destination?

Occasional Visitor
karvet

Re: Can't dial IP addresses containing a zero, or DNS names

Hi Guys!

Same problem with Polycom RealPresence Mobile 1.0.2-11459_2875.

I got messages "Invalid IP address" while dialing IP addresses containing zeros(direct call with/without  routers, firewalls, etc...). At same time, client dials normally to destination without zeros in IP address octets (through router and firewall).

 

 

Best regards,

 

Vitaly

 

Occasional Visitor
LOJOBOchris

Re: Can't dial IP addresses containing a zero, or DNS names

Has anyone figure out what the solution to this problem is?

Frequent Visitor
bdale

Re: Can't dial IP addresses containing a zero, or DNS names

Hi Marcux,

I just tried 192.168.0.5 and it failed. Are you sure your client is unregistered?

Cheers,

Ben
Occasional Visitor
techknowguy
0

Re: Can't dial IP addresses containing a zero, or DNS names

Im having the same problem, I have codecs that are all independent endpoints (i.e. no gatekeeper). I can dial to 10.64.8.10, 10.65.8.10, 10.66.8.10 and 10.67.8.10 just fine. But if I try to dial 10.0.40.10, or 10.0.40.11, the app tells me "Invalid IP address".

 

And just FYI, I can dial from the codec to the app just fine, just not from app to codec.

 

Polycom, PLEASE FIX!

 

Tech:

iPad 2 16gb WiFi only, iOS 5.0.1

App version: 1.0.2-11459_2875

Codec VSX 8000 and HDX 9001