Reply
Occasional Visitor
Posts: 1
0

How to use a VVX601 that was purchased for another system with Skype for Business

I purchased a VVX 601 when using a different vendors phone solution. I have left that system and now i want to use my VVX601 with Skype for business. Can someone tell me how this can be done? I already have an Office 365 account with Cloud PBX and PSTN dialing. I just need to get my VVX 601 phone connected to it.

Polycom Employee & Community Manager
Posts: 13,978
0

Re: How to use a VVX601 that was purchased for another system with Skype for Business

Hello krauton,

welcome to the Polycom Community.

Quite simple and you must purchase a Polycom per phone LYNC / Skype for Business License for every single phone you want to utilise.

 

License requirements

 

Please be aware of the following:

 

The use of Polycom UC Software versions 4.1.X (“Software”) requires the purchase of a separate Software license for every device that will use the Software in a Lync environment. You may not install, access, or use the Software in a Lync environment on more devices than are listed on your license until additional licenses have been purchased and authorized by Polycom. These licenses should be purchased from the same company from which you purchased the devices. You may operate devices against a Lync server for trial purposes for up to 30 days without purchasing a license. Use of the Software is subject to the terms and conditions of the End User License Agreement. 

Polycom reserves the right to audit your deployment to verify that you have sufficient licenses to match the number of devices being used.

 

 

5150-49252-001 SW,LIC,LYNC ENTERPRISE IND PHONE
5150-49253-001 SW,LIC,LYNC ENTERPRISE SITE (5 UNITS)
5150-49254-001 SW,LIC,LYNC ENTERPRISE SITE (10 UNITS)
5150-49255-001 SW,LIC,LYNC ENTERPRISE SITE (100 UNITS)
5150-49256-001 SW,LIC,LYNC ENTERPRISE SITE (1000 UNITS)
5150-49257-001 SW,LIC,LYNC ENTERPRISE SITE (10000 UNITS)

 

And follow this => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Advisor
Posts: 21
0

Re: How to use a VVX601 that was purchased for another system with Skype for Business

There are several websites that show exactly now to use the Polycom vvx601 with skype for business with step by step walk through.

 

You basically just need to have the latest firmware, although buggy somewhat, do a master reset.  Select the Skype/Lync profile, then login with your credentials right after that.  

 

As long as the above poster stated you have PSTN and calling features/plan enabled for the user, it will connect/work.

 

Polycom Employee & Community Manager
Posts: 13,978
0

Re: How to use a VVX601 that was purchased for another system with Skype for Business

Hello techlogik,

welcome to the Polycom Community.

Any User that wants to utilize a Non Skype for Business or LYNC SKU phone aka not a -019 or -018 also needs in addition the above quoted license to legally use the phone.

 

We check these and if they ever need support we ask for the prove of this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.