So on page 14 of this guide listed at the bottom it reads:
"In order to provision SoundStructure VoIP Interface to work with Microsoft Lync Server 2010 and 2013, you need to import a configuration file into the SoundStructure VoIP Interface using the Web Configuration Utility. Using the Web Configuration Utility, you can import a configuration file with all the parameters required for Lync, register SoundStructure VoIP Interface with Lync Server, and configure the SIP settings necessary to make and receive phone calls on SoundStructure VoIP Interface."
"Attached to this guide is a configuration file template with all of the configuration parameters required for provisioning SoundStructure VoIP Interface for use with Lync Server. The attached configuration file is organized into three folders and is specific for SoundStructure VoIP Interface running UC software 4.1.3G. Note that you cannot use the configuration file with previous versions of UC software or other Polycom devices."
My question is WHERE IS THE CONFIGURATION FILE TEMPLATE?
welcome to the Polycom Community.
The File SoundStructureVOIPConfig_UCS413G_Lync2010and2013.cfg is actually attached within the PDF.
I will in addition try and find it internally and attach it to this post.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services