cancel
Showing results for 
Search instead for 
Did you mean: 

VVX201 Frozen Screen issue

Visitor

VVX201 Frozen Screen issue

Hi , 

 

We bought 100 or more VVX201 model polycom phones to use with Skype for Business and rolled it out with version 5.5.2.8571 , Part # 3111-40450-001 Rev:A

 

almost all the phone have PC connected through it , and we do not use BTOE however the feature is enabled on the phones

 

Everything was pretty good until we found that polycom screens would freeze at random , ones the phone was frozen we could not use the phone 

- no calls would be received , nor can you dial out 

- You can web into the phone 

 

 

Since we could web into the phones we managed to grab the logs off frozen phones and below is the last bit .

After the BTOE errors the phone stops , as the time matches on the phone matches the logs time 

Do any of polycom uses face this issue , any idea why would this happen ? any solutions 

 

0725180458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725180958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725181458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725181958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725182458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725182958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725183458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725183958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725184458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725184958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725185458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725185958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725190458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725190958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725191458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725191958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725192458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725192958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725193458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725193958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725194458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725194958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725195458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725195948|dns |5|00|Not adding DNS Querie name:manukau.ac.nz sDomain:manukau.ac.nz
0725195948|dns |5|00|Not adding DNS Querie name:manukau.ac.nz sDomain:manukau.ac.nz
0725195948|dns |5|00|Not adding DNS Querie name:manukau.ac.nz sDomain:manukau.ac.nz
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^[\+1]?0?(?:0?64)?(867\d{6,} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^8\d{4} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^2\d{7,9} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^[\+1]?0?(?:0?64)?(800)\d{6,} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^8\d{4} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^2\d{7,9} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^[\+1]?0?(?:0?64)?(508)\d{6,} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^8\d{4} 
0725195948|utilm|4|00|Failed to Convert MicroSoft Dial plan: ^2\d{7,9} 
0725195948|utilm|4|00|Failed to Convert all the MicroSoft(Lync) Dial plans
0725195949|ec |4|00|Exchange URL available in configure '<exchange.server exchange.server.url="0.0.0.0" />'
0725195958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725200458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725200958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725201458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725201958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725202458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen248
0725202958|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen253
0725203458|hw |5|00|Task ended without calling rtosTaskEnd() name=tTCPListen252
0725203655|btoe |4|00|PC Port is Down, Stop Pairing
0725203655|btoe |4|00|PC Port is Down, Stop Pairing
0725203655|btoe |5|00|4 Request Not Handled
0725203655|btoe |4|00|stopCall ppsBtoe.hSoCall handle is NULL
0725203655|btoe |4|00|PC Port is Down. Inform to APP UI
0725203655|app1 |*|00|AppC::updateBackLightAndTouchScrStates() - Backlight states - present - [2], previous - [0].
Message 1 of 7
6 REPLIES
Polycom Employee & Community Manager

Re: VVX201 Frozen Screen issue

By Shynel

Please get this into Polycom support

Replied via a mobile device
Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 7
Highlighted
Polycom Employee & Community Manager

Re: VVX201 Frozen Screen issue

Hello Shynel,

just to "officially" reply not via a mobile device.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you. End Customers are usually unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 3 of 7
Visitor

Re: VVX201 Frozen Screen issue

Hi ,

 

It’s funny, I thought this was Polycom community support , where customers can collaborate and answer each other’s questions and maybe seek tech support from other users with similar or likely issues hence resolving there issue quickly rather than going to reseller. Note sure what the purpose is then for this community ?

 

In any case, this post had about 250 views indicating that quite a few Polycom users are interested in this , so just to let others know that for whatever reason BTOE was the culprit that was causing the phone VVX201 to freeze only when a PC is passing through the Polycom phone. When the PC NIC goes to sleep the BTOE seems to have an issue with it and freezes the entire phone ( but you can still web, SSH ) , note this used to happen very randomly 2-3 week apart.

 

Since we have turned off BTOE from Polycom , we had no freezing issue.

Message 4 of 7
Polycom Employee & Community Manager

Re: VVX201 Frozen Screen issue

Hello Shynel

You can do all that and other users are welcome to look at a post and respond if they know a solution.

As only Polycom itself can fix any potential issues we would need to follow the official route

This is all outlined in my signature and throughout the community.

Replied via a mobile device
Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 5 of 7
Visitor

Re: VVX201 Frozen Screen issue

Hello Shynel, 

This has been a serious problem with the VVX line(I'm not sure about other product lines, as we only use 201s and 410s), but you would never know it from the lack of documented solutions.  Every post related to the issue usually derails with the moderator pointing the user back to their respective resellers.  When you say BTOE was the culprit, did you merely remove the BTOE client from the user's machine, or did you disable it in your config?

 

Kudos for finding a viable solution btw.

Message 6 of 7
Polycom Employee & Community Manager

Re: VVX201 Frozen Screen issue

Hello jowatson,

welcome to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here

 

I am unsure why mentioning the only viable solution aka us, Polycom, dealing with an issue in our software being a problem for a User.

 

This community is hosted by Polycom and any reported Problem can only be fixed by us. Asking a user to get this into support should not be to much to do as in reality we are most likely the only ones who can fix a problem.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 7 of 7