-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Meeting Room Solutions
- 3GPP Dialing Standard
Create an account on the HP Community to personalize your profile and ask a question
11-04-2015 12:48 AM
Polycom HDX endpoint running ver 3.0.4 when integrated/registered using SIP with Huawei IMS System doesnt able to call due to tel: formate being expected. They need to convert tel : format to SIP format. Does new upgarded version supports Tel: format as expected by Huawei IMS
Solved! Go to Solution.
Accepted Solutions
11-12-2015 02:29 AM
Hello DD_79003,
I can only recommend to work with your Polycom reseller so they can open a Polycom support ticket for you.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
11-04-2015 01:25 AM
Hello ,
welcome to the Polycom Community.
According to the RFC 3966:
-
Unless a SIP UA connects directly to a PSTN gateway, one of the SIP proxy servers has to translate the "tel" URI to a SIP URI, with the host part of that URI pointing to a gateway.
Checking the HDX Release notes 3.1.0:
- Ericsson SIP Interoperability
You can now make HDX system videoconference calls through the Ericsson IP Multimedia Subsystem (IMS), an architectural framework for delivering internet protocol multimedia to mobile users. New HDX system features
include Earlymedia and Tel URI support. Earlymedia is not supported in these conditions:
• If the HDX system is already in an active multipoint call, for the second call and those afterward
• If the HDX system is registered with a Microsoft Lync server
I can only ask you to check using a HDX release after 3.1.0
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
11-12-2015 02:19 AM
Thanks steffen for your prompt reply and appologies from my side replying late due to setting up Lab environment.
Tested with Higer Version but didn't work as they were not dialing complete URI, explained below:-
- SIP URI assigned to HDX is +9682424xxx
- They want to call HDX with only 2424xxx (as dialing local calls) expecting HDX to pre-pend/understand +968
- If complete number is dialed i.e. +9682424xxx then calls get connected successfully.
hence recommanded that pre-pend should be done from Huawei Registrar side before sending invite message to HDX
Testing Results:
1,In the SIP protocol invite message if the caller number format with +968, the call will be successful. but there have a problem is that the CLIP is international number even if this is a local call.
From: <tel:+96824243494;noa=international;srvattri=national>;tag=bsf2cgb9
2, In the SIP protocol invite message if the caller number format without +968, the call will be failed.
From: <tel:24243494;noa=subscriber;srvattri=national;phone-context=+968>;tag=1b8e9cgg
Thanks and Regards,
11-12-2015 02:29 AM
Hello DD_79003,
I can only recommend to work with your Polycom reseller so they can open a Polycom support ticket for you.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Didn't find what you were looking for? Ask the community