Reply
AJH
Occasional Contributor
AJH
0
Accepted Solution

HDX 6000 cannot access Lync 2010 directory

I have HDX 6000 running 3.0.4-20259 integrated into Lync 2010 system. The HDX 6000 appears in the Lync contact list and calls can be made and received. The Global Directory -> Directory Servers page in the HDX 6000 Admin system has a big green tick next to Registration Status.

 

Searching the Lync directory results in an error ;

 

 "The directory server is unable to process your request. Please try again or contact your system administrator for assistance.

 

Has anyone else had this problem and found a solution ?

 

 

 Thanks.

 

 

Polycom Employee
jschertz

Re: HDX 6000 cannot access Lync 2010 directory

Roughly how many user objects do you have in your Active Directory forest?  There is an upper-limit on the size of the Lync address book which can be downloaded and extracted by the HDX which is being addresses in a future firmware release.

 

It is possible that the HDX is unable to expand the address book file and that would cause the error you are seeing, as the green check mark indicates that connectivity to the address book web service is working.

-
Jeff Schertz - Microsoft Solutions Architect [Blog]
AJH
Occasional Contributor
AJH
0

Re: HDX 6000 cannot access Lync 2010 directory

Thanks for taking the time to reply.

 

We have around 23,000 user objects in our AD forest.

 

Looking at the debug output below from the HDX , I'm guessing that the "A13ba: 20000 nic dirsearch" indicates that a 20,000 users limit has been reached ?

 

2012-05-03 08:55:53 DEBUG jvm: pc[0]: UI: fcgi/0: WEBUI:CGI:ABKHandler:execCGI:Enter command = 2

2012-05-03 08:55:53 DEBUG avc: pc[0]: uimsg: [A13ba: 20000 nic dirsearch 1 0 200 sn smith]

2012-05-03 08:55:53 DEBUG avc: pc[0]: SIPNIC[0]: csapiDirectorySearchSupported: unable to connect to the directory server for ocs

 

 

Andy

Polycom Employee & Moderator
SteffenBaierUK
0

Re: HDX 6000 cannot access Lync 2010 directory

Hello Andy,

 

I have seen this "csapiDirectorySearchSupported" message in other logs before. The more important Information is a few lines below that message,

 

Please be aware that you should really work via your Polycom Reseller and/or Polycom Support in order to troubleshoot this further.

 

Best regards

 

Steffen Baier

 

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

Above is necessary in order to track issue internally within Polycom.

Please ensure to always check the VoIP FAQ , PSTN FAQ or RPM FAQ

If you find my post helpful, and it answers your question, please mark it as an "Accepted Solution" and feel free to give me Kudos.
Polycom Employee
jschertz

Re: HDX 6000 cannot access Lync 2010 directory

Yes, it appears your address book has exceeded the upper limit of the current HDX release. You can a support ticket through your official channels for tracking of the issue, but the next release of firmware should resolve this issue for you as some architectural changes are being applied to how the HDX uses the Lync address book web service in these large environments.

-
Jeff Schertz - Microsoft Solutions Architect [Blog]
Occasional Visitor
stnz
0

Re: HDX 6000 cannot access Lync 2010 directory

Same problem here. The search was working totally fine earlier with three HDX 7000 devices, now it isn't.

 

Some Lync updates were obviously installed about at the same time as it broke, that could be related.. Maybe?

Occasional Visitor
stnz
0

Re: HDX 6000 cannot access Lync 2010 directory


stnz wrote:

Same problem here. The search was working totally fine earlier with three HDX 7000 devices, now it isn't.

 

Some Lync updates were obviously installed about at the same time as it broke, that could be related.. Maybe?


And logs show this:

 

2012-05-04 13:48:14 INFO avc: pc[0]: OCS: OCSConnectTimerExpireCallback: connection timer expired
2012-05-04 13:48:14 INFO avc: pc[0]: OCS: OCSDownloadAddressBook: read compressed file open succeeded
2012-05-04 13:48:14 INFO avc: pc[0]: OCS: OCSDecompressFile: In = 0x5c41f760, Out = 0x5c41def0
2012-05-04 13:48:14 WARNING avc: pc[0]: OCS: OCSDecompressFile: decompression overflow = 1348031555, 1952981061
2012-05-04 13:48:14 WARNING avc: pc[0]: OCS: OCSDownloadAddressBook: file decompression failed

 

There are only like 150 users on Lync, so.. it shouldn't be too much?

Polycom Employee
jschertz
0

Re: HDX 6000 cannot access Lync 2010 directory

What specific updates were installed and for which components?

-
Jeff Schertz - Microsoft Solutions Architect [Blog]
Occasional Visitor
stnz
0

Re: HDX 6000 cannot access Lync 2010 directory


jschertz wrote:

What specific updates were installed and for which components?


I will check and let you know when I have time and access to the system, either later today or tomorrow.

Occasional Visitor
briana
0

Re: HDX 6000 cannot access Lync 2010 directory

Any updates on this Lync directory issue? We are having the same issue with a new HDX 7000 with the latest software. Everything works but the directory lookup. We are not a large environment (300 users).