07-26-2011 05:40 AM
Please try the following:
Turn the unit off
Reseat the camera cable
Turn the unit back on
This will force the camera to re establish communications with the CODEC.
Quick question. Are you using any kind of custom cabling?
If this doesn’t solve the issue, please give technical support a call, 888-248-4143 option 4
08-31-2011 09:53 AM
In order to reset the image on the EagleEye View, please perform the following steps:
1. Turn off the system.
2. Disconnect the camera cable.
3. Place the camera in the desired position, right-side up or upside-down.
4. Reconnect the camera cable.
5. Power the system back on.
Please note that you must disconnect and reconnect the camera cable in order to reset the image.