-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Meeting Room Solutions
- Re: HDX7000 Firmare update failed
Create an account on the HP Community to personalize your profile and ask a question
08-28-2014 05:10 AM
I've tried to update my HDX7000 to the newest firmware 3.1.4 but the update failed. And after the reboot all the text was replaced by the text UNKNOW, even the webinterface doesn't work anymore.
Im sort of freeking out, what can i do??
Solved! Go to Solution.
Accepted Solutions
08-29-2014 11:02 AM
Okay did you try just doing a hard reset with no USB? If you haven't try that. Though if that doesn't fix your issue you would have to report this issue to Polycom tech support.
08-28-2014 08:23 AM
Well the only option that comes to mind is doing this via USB.
I would get a USB stick that formatted for FAT 32. Put the 3.1.4.pup file onto the root of the USB stick. Turn off the HDX and plug the USB into the back of the HDX. Then turn on the HDX and hold down the reset button right below the power button. You should use a paper clip or something that can fit into the reset button. Hold the reset button until the blue light flashes amber. This will reset your HDX and install the software off the USB stick.
08-29-2014 07:39 AM
I did like you told but i dont see a firmware upgrade.
what i did :
- format the usb to FAT32 en put the file on the usb
- put the usb in the system
- put a paperclip into the tiny gap
- turned on the machine, but no light is flashing amber just blue
- when the whole system booted up i tried to rest it again, and the light flashes amber, the machine rebooted it but no upgrade.
- i tried it again after the self test, the light flashes amber and i got a setup screen to choose my language, so i choose english/american but still no luck. every text says unknown unknow....
what is going wrong...?
Didn't find what you were looking for? Ask the community