08-10-2012 03:35 PM
Hello All thankyou for reading - I have a VSX 8000 codec.
I just purcahsed a serial to enable Multipoint Feature.
I entered the generated code but for some reason I'm not able to enable Multipoint- Can soomeone help here is my serial -
I hope i didnt buy the wrong code -
Thank you very much.
08-11-2012 12:41 AM - edited 08-11-2012 12:49 AM
the mp key has been generated, according to the polycom support page.
Enter this one "KF31-3991-F450-0000-0001" on your vsx options page.
Just to clarify one thing:
Your vsx has the serial number you´ve posted ?
When you try to activate a vsx or hdx option, you have to enter your license key and your vsx or hdx serial number.
The option is then tied to that specific serial number (that vsx or hdx machine) and can´t be used on another codec.
That means that, when you´ve bought that serial number you´ve posted above, you won´´t be able to use that option because the license has already been activated for another machine.
08-13-2012 07:59 AM
Thank you for your response.
Yest that the serial number for the codec I purchased the Multipoint Key for.
That is the exact serial key i'm using but for some reason when I enter it I dont get the option to enable Multipoint.
Not sure what I'm doing wrong?
08-30-2012 03:48 AM
Just check what is the software version your using in the machine if it is not the same as version 9.0 the key wont accepted by the machine you need to upgrade the machine with propoer software version
08-30-2012 08:23 AM
So I looked into this for you. I found that MP key K1039-5740-6021-2220 is a 4 Way MP key. The VSX 8000 needs a 6 Way MP key. I can only recommend you go back to the reseller you got the key from and ask for a VSX 6 Way MP key from them.
08-31-2012 02:20 AM
In which case the license key should have been rejected by the portal with an appropriate error message. I've been working with VSXs since their launch & I had missed this vital point. Good luck tfahie2000.