Reply
Visitor
Posts: 5
0
Accepted Solution

Hide line key for voicemail number

I am using the VVX 410 UC Software Version 5.5.1.12442 and they are on a multi line hunt group. The hunt group has its own voicemail box and the phone has to be registered to the line to check the mail box. Is there a way to hide the line key for the voicemail line. I want it to show up on the message center but not on the line key.  

 

I noticed in the web gui there are 34 possilbe lines but when I register anything past line 12 they do not work. 

Highlighted
Polycom Employee & Community Manager
Posts: 13,551
0

Re: Hide line key for voicemail number

[ Edited ]

Hello rfut,

 

Your old posts => here <= is still open / pending as you have not marked these as "Accept as a solution".

 

If they are in this state nobody finding them via a community search will know if an answer or advice was useful and has helped you.

 

Could you therefore kindly go over them and mark or answer as appropriate ?

 

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. 

RecentlyAnswered.PNG

 

For your new question the phone has got a physical amount of line keys. You can only assign as many line keys as you have actual keys. For more keys you need an expansion module.

 

I am not sure what you mean by your voice mail question.


Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.