cancel
Showing results for 
Search instead for 
Did you mean: 

How do I insert a PAUSE into a speed dial?

Occasional Visitor

How do I insert a PAUSE into a speed dial?

I can do this very easily with every other phone I have, but on my VVX500, I can't seem to figure this out...  

 

Please advise.

 

-Jared

Message 1 of 4
3 REPLIES
Polycom Employee & Community Manager

Re: How do I insert a PAUSE into a speed dial?

Hello Jared,

welcome to the Polycom Community.

This is not possible and extensively discussed => here <=

 

There is an option to create an EFK with a pause as shown  => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Visitor

Re: How do I insert a PAUSE into a speed dial?

This issue just came up at an install of 5 sites approximately 150 Polycom VVX 300 and 400 phones. Any chance this feature request has been addressed?

 

Thank You, 

Message 3 of 4
Highlighted
Polycom Employee & Community Manager

Re: How do I insert a PAUSE into a speed dial?

Hello jmorse4dct,

welcome to the Polycom Community.

This is not yet included.

 

I will close this post to prevent others asking the same until we release this in a future software version.


Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 4 of 4