Reply
Occasional Advisor
Posts: 9
0

Set "Generic" base profile in config file

Hi

 

I'm trying to get a test VVX  311 to switch to the Generic base profile via config file, rather than having to later explain to people to simultaneously press 1,2,4,5 and switch manually as per the admin manual. Could someone help with the config file directive needed to get the phone to switch to the Generic profile on first boot?

Highlighted
Polycom Employee & Community Manager
Posts: 14,015
0

Re: Set "Generic" base profile in config file

Hello Bivin VIjai's ,

 

A couple of your old posts => here <= are still open / pending as you have not marked these as "Accept as a solution".

 

If they are in this state nobody finding them via a community search will know if an answer or advice was useful and has helped you.

 

Could you therefore kindly go over them and mark or answer as appropriate ?

 

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. 

RecentlyAnswered.PNG


In addition the combination is 1,4 and 9 and not what you stated.

 

You can simply use:

 

<test device.set="1" device.baseProfile.set="1" device.baseProfile="Generic" />

You would simply load the above via a 00000000000.cfg or <mac>.cfg

 

Oct 7, 2011 Question: What is the relevance of the 000000000000.cfg or <mac>.cfg?

Resolution: Please check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.