04-27-2012 05:40 AM
I am just getting grips of Polycom phones. I have created FTP provisioning account for the IP331. I upgraded all the phones from 3.x.x to 4.0.2B. The UC Software works fine for us. Recently we purchased IP335 phones and I cannot get them running using the same provisioning server. There are no logs uploaded by the phones so I dont know what I am doing wrong.
Can anyone help me?
here is the factory configuration I have:
application SIP 3.2.4.0267
04-27-2012 06:33 AM
welcome to the Polycom Community.
The behavior changes on bootup depending when the Phone was manufactured. For example as mentioned => here <=
You may want to contact your Polycom Reseller for further support.
Polycom Global Services
The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a web service request or call us .
Above is necessary in order to track issue internally within Polycom.
Please ensure to always check the VoIP FAQ , PSTN FAQ or RPM FAQ
If you find my post helpful, and it answers your question, please mark it as an "Accepted Solution" and feel free to give me Kudos.