07-12-2012 06:12 AM
Please can you explain the programming procedure for programming IP7000 SIP phones into a Nortel CS1000. It would appear that there is no way of inputting the phone number onto the phone once on the network.
Solved! Go to Solution.
07-12-2012 06:18 AM
welcome to the Polycom Community.
We encourage all users to read the FAQ and use the Forum Search.
Please check => here <= as we do not post specific instructions for individual PABX / SIP Servers.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a web service request or call us .
Above is necessary in order to track issue internally within Polycom.
Please ensure to always check the VoIP FAQ , PSTN FAQ or RPM FAQ
If you find my post helpful, and it answers your question, please mark it as an "Accepted Solution" and feel free to give me Kudos.
09-19-2012 02:14 PM
You may find the Avaya DevConnect Application Notes for configuring various Polycom SIP endpoints with CS1000 useful given that all Polycom SIP phones run the same Polycom UC Software: