Plantronics + Polycom. Now together as Poly Logo

Conference properties window opening delay

Occasional Contributor

Conference properties window opening delay

Hi ... 

I am using RMX manager 8.5 for RMX 1800  . On clicking the conference properties , the window opens with a delay. I have a 16Gb RAM pc. Comments please

Message 1 of 2
Polycom Employee & Community Manager

Re: Conference properties window opening delay

Hello @Shanky ,

Welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. Please do not simply mark them without any type of feedback.


In addition, it is always helpful for us volunteers if your posts would contain all required information i.e. the software versions used. in this case, they did but others have missed this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2