How to setup RMX gateway profile PSTN voice call out over simplified dialing from HDX endpoint?
Btw. H.320 call out over simplified dialing from HDX endpoint will work very good.
Only PSTN will fail.
Thanks in advance for an answer.
before to fire a PSTN call you will have to specify the phone or isdn over phone in the field of type of call,to get the know to system which kind of call you are going to place.
have you created any dial rule for PSTN call's??
Have you assian a voice port at RMX end??check whether you assianed a voice port at RMX end.
I too am looking to do this same thing.
Here is what I have:
Dial rule set - 91, route to GW service PSTN
Service set up pointing back to my RMX with the same ID
Gateway Profile set to 64k and PSTN, same ID number as the serive in my CMA
What am I doing wrong?