-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
Create an account on the HP Community to personalize your profile and ask a question
11-01-2013 02:18 PM
Hello Everyone,
I have a doubt about integration. I have an MGC -25, five VSX 7000 endpoints and two HDX 7000 endopoints. My question is, it can be possible integrate all polycom videoconferencing network to Cisco Call manager?
HDX software version 3.0.5-22695
VSX software version 9.0.1
Cisco call manager software version 9.1.1.20000-5
It is possible integrate the MGC, VSX and HDX to Cisco call manager? if is so possible, What i need to do this?
Solved! Go to Solution.
11-26-2013 07:14 PM
Actually it works though the road to the retarded solution is nowhere to be found on any manual, as it is typical for both Cisco and Polycom 🙂
1. Create a room in MGC and the room number is the critical thing: that number will latter be referenced in the CCM dialing pattern
2. Create a dial-peer in any router:
dial-peer voice 125 voip
tone ringback alert-no-PI
preference 1
destination-pattern 3644
progress_ind setup enable 3
progress_ind alert enable 8
voice-class codec 1
session target ipv4:192.168.248.32
dtmf-relay h245-alphanumeric
no vad
That's it; and yes my room number is 3644 and the IP span of the MGC-25 is 192.168.248.32
Of course in my case 3644 is a valid DID pushed to the SAME router via it's PRI interface so that outside people can also join the conference just as in-house folk. If you put a password on your room then IVR will ask the caller for the password - pretty respectible out of the box functionality.
~B
Didn't find what you were looking for? Ask the community