Plantronics + Polycom. Now together as Poly Logo

Need Help with "Auto Redialing" RMX2000

Occasional Visitor

Need Help with "Auto Redialing" RMX2000

Hi@all,

 

I've a big problem! The feature to automatically redial participants that have been abnormally disconnected from the conference does not work, or maybe I use the wrong method to test it (unplug LAN-cable and after a short time I plug it in again)

 

Following Scenario:

 

RMX2000 v. 7.6.1.136

CMA4000 v.5.5

All endpoints are HDX8000, registered to the CMA-Gatekeeper.

 

- Conferences are scheduled in the CMA

- The tick box "Auto Redial" in the Conference-template (CMA) is checked

- The tick box "Auto Redialing" in the Conference-Profile (RMX) is checked

-  I set the system flags "NUMBER_OF_REDIAL" = 5 and "REDIAL_INTERVAL_IN_SECONDS" = 20

 

I scheduled some conferences. If I disconnect and reconnect the LAN-Cable, the RMX indicates a participant alert, but the RMX does not try to redial this participant. 

 

My questions:

Have I forgot something to configure?

Have I done something wrong?

Is disconnecting and reconnecting the LAN-Cable a good method to test the "auto Redialing"?

If not, how can I test this feature?

 

 

Please help me!!!

Thanks a lot!!

 

best regards

Markus

 

Message 1 of 8
7 REPLIES 7
Respected Contributor

Re: Need Help with "Auto Redialing" RMX2000

Markus,

 

Are these sites dial in or dial out ?   I've only used "Auto Redial" in dial out situations and in previous versions, has worked.   I've not tested the lastest release.

 

Gary M

Wanna' Test your H.323 System? (71.14.2.157 or 71.14.2.158)
cb157.miyakawa.us and cb158.miyakawa.us
www.miyakawa.us
www.codecsidekick.com
Message 2 of 8
Occasional Visitor

Re: Need Help with "Auto Redialing" RMX2000

Hi Gary,

 

thanks for your reply!

 

They are all dial out. (Dial out works fine!)

 

I've tried the "Auto Redial" in release 7.6.0.172 and 7.6.1.136 without success.

On Monday I will upgrade the RMX to 7.6.138 and try again, but I don't think this will solve the problem.

 

Markus

Message 3 of 8
Honored Contributor

Re: Need Help with "Auto Redialing" RMX2000

Marcus,

 

As I know, the "auto redialing" works only at the initial connection. If the the participant is disconnected this feature does not act. 

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld
Message 4 of 8
Occasional Advisor

Re: Need Help with "Auto Redialing" RMX2000

Hello,

 

Is anyone using this feature? I'm facing similar difficulties trying to enable this.

 

Another point that I would like to raise is about audible alarms when participants are disconnected. There is an alert for this (dial out) but there is no audio on it. Has anyone surpassed this?

 

DMA, RM, RMX, RPAD in the latest version.

 

Regards,
Fabio

Fabio Rigotto
Message 5 of 8
Polycom Employee & Community Manager

Re: Need Help with "Auto Redialing" RMX2000

Hello Fabio,

welcome to the Polycom Community.

Its quite bad practice to state "latest software" as a week, month or a year down the line nobody looking at this post will know what that software version was at the time of posting.

 

Please always include the actual software version.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<==== Signature / Disclaimer ======>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 6 of 8
Occasional Advisor

Re: Need Help with "Auto Redialing" RMX2000

Hi Steffen,

 

Thank you very much for your prompt return. I understand your point, please find below the information:

 

DMA 6.2.1_P1_Build_185029

RM 8.3.0.0-173290

RMX 1 -  8.5.3.47

RMX 2 - 8.5.3.47

 

Regards,

Fabio

 

 

Fabio Rigotto
Message 7 of 8
Highlighted
Occasional Advisor

Re: Need Help with "Auto Redialing" RMX2000

Hi Steffen,

 

Dou you have any additional comment to make regarding this issue?

 

Regards,

Fabio

Fabio Rigotto
Message 8 of 8