Plantronics + Polycom. Now together as Poly Logo

RMX 1500 connected directly to out site WAN

SOLVED
Ferdi
Occasional Contributor

RMX 1500 connected directly to out site WAN

Hello,

 

If I configure an RMX 1505 directly to the internet so other multiply people can reach this RMX and use an IVR for access. Is it possible to configure an internal endpoint to use a LAN address in the same network as the RMX. Or is this not possible and I need to give the internal end-point a WAN address also?

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Mike_v
Honored Contributor

Re: RMX 1500 connected directly to out site WAN

The right way to organize conference with both internal and public users is to use the Network Separation option. Please refer to RMX Admin's Guide -> Multiple Network Services for more details.

 

WBR,

Mike

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld

View solution in original post

Message 2 of 2
1 REPLY 1
Mike_v
Honored Contributor

Re: RMX 1500 connected directly to out site WAN

The right way to organize conference with both internal and public users is to use the Network Separation option. Please refer to RMX Admin's Guide -> Multiple Network Services for more details.

 

WBR,

Mike

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld

View solution in original post

Message 2 of 2