RMX patch up with public ip

[Anonymous]

Hi All,

i would like to patch up RMX with public ip,if some one dial in our public ip call land on the RMX stright a way without any discovery.

can anyone offer a advice??

Regards

Yashpal

[Mike_v1]

Your wish is not clear but at a first sight the Network Separation option is that you are looking for. More details can be found in RMX Admin Guide -> Network Services -> Multiple Network Services.

[Anonymous]

Hi Mike,

i was meant that i would like to aline one of our RMX for public ip dial in.if some some dial out our public ip call directly lands to our RMX.

Regards

Yashpal

[Anonymous]

Hi,

what you can do is to use the public IP address of you VBP.

your VBP will connect the call to your RMX. since it already has pub

VBP_PublicIP##RMX_AliasConferenceID

RMX_Alias is the alias with which the RMX registered to the CMA. that you will find on the RMX under IP network service, Gatekeeper.

the dial string should look like this

196.8.125.131##2721001

hope this helps.

[simons3]

If a VBP is involved, you can use the default alias function which you would enter the alias of the RMX. Then an external user just dials the Public IP and automatically gets the IVR of the RMX.

S.

[Anonymous]

Hi simon,

Your solution is not clear.

Regards

Yashpal