Plantronics + Polycom. Now together as Poly Logo

RMX1500 with MPMx v.7.2.2.64 ISDN question

Highlighted
Occasional Advisor

RMX1500 with MPMx v.7.2.2.64 ISDN question

For one of our customers we need to know how many ISDN numbers or ranges the RMX can handle. This is because their PRI  provider is only able to issue very short number ranges or even seperate numbers.

 

Message 1 of 5
4 REPLIES 4
Highlighted
Valued Contributor

Re: RMX1500 with MPMx v.7.2.2.64 ISDN question

your wish is not clear,if you need to know how many pri can configure on RMX so there is pri card on RMX which having 12 ports.

 

 

Regards

 

Yashpal

BR
Yash
Message 2 of 5
Highlighted
Occasional Advisor

Re: RMX1500 with MPMx v.7.2.2.64 ISDN question

No this is an existing configuration, so they have a PRI card installed and they have a PRI line in place, already working OK.

 

The PRI has already a lot of telephone numbers assigned to it. These are already assigned to virtual rooms.The number of virtual rooms is increasing rapidly so if they want to assign isdn numbers to new virtual rooms they would need extra numbers.

 

Their provider is only able to provide very short ranges of numbers or even only seperate individual telephone numbers, contrary to one consecutive block of numbers (what would be normal).

 

We NEED to know the maximum amount of numbers or number ranges which can be assigned to this one single PRI on the RMX.

 

Hope this helps.

 

Luuk

 

Message 3 of 5
Polycom Employee & Community Manager

Re: RMX1500 with MPMx v.7.2.2.64 ISDN question

Hello Luuk,

welcome to the Polycom Community.

Looking at the RMX Admin Guide for version 7.2.2 on page 14-54 within the ISDN/PSTN Network Services section:

 

• A range must include at least two dial-in numbers.
• A range cannot exceed 1000 numbers.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 5
Highlighted
Occasional Advisor

Re: RMX1500 with MPMx v.7.2.2.64 ISDN question

Thanks Steffen, we're getting there... almost.

 

Considering your mail, I think my question should be: how many ranges can be used?

 

This can't be found in any document I've seen until now.

 

Thanks

 

Luuk

 

Message 5 of 5