Plantronics + Polycom. Now together as Poly Logo

RMX2000 and webcams

Occasional Visitor

RMX2000 and webcams

Does anyone know if it's possible to connect to a RMX2000 with regular webcams?  Basically, use the rmx2000 to bridge in calls initiated with regular webcams.  These will be inside the same network the rmx2000 resides in.


Also, does anyone know the ports rmx2000 uses for natting? 

Message 1 of 2
Polycom Employee & Community Manager

Re: RMX2000 and webcams

Hello luisfuentes,


welcome to the Polycom Community.


The RMX is a Bridge that can be dialed from End Points.


A PC running our m100 Software or a Microsoft LYNC Client can both utilize a Web Cam connected to the PC.


Please check the Release Notes for Camera Limitations and required PC Speed.


The Admin Guide should cover all port related questions.


For further details please work with a Polycom Reseller.


Best Regards


Steffen Baier


Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2