Plantronics + Polycom. Now together as Poly Logo

RMX4000 packet loss

Doug_1211
Occasional Visitor

RMX4000 packet loss

We have a RMX4000, firmware 8.1.7.3.5 and connect over a t3/cisco network hardware and mixed endpoints.the RMX has been reporting high packet loss over the network to endpoints in the past 4 weeks, has there been any update with cisco network hardware that can cause bridge packet loss?

Message 1 of 2
1 REPLY 1
Mike_v
Honored Contributor

Re: RMX4000 packet loss

I'm not sure that this is your case but we met cases when Cisco equipment doesn't understand autonegotiation network settings. Try to go at Setup -> Ethernet Settings and change Speed from default Auto to the mode supported by Cisco. Find more details in RMX Admin's Guide -> Network Services -> IP Network Services -> Ethernet Settings.

 

Hope this could be useful.

WBR,

Mike

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld
Message 2 of 2