Plantronics + Polycom. Now together as Poly Logo

Unable to ping signalling or control IP of RMX2000

Highlighted
Occasional Advisor

Unable to ping signalling or control IP of RMX2000

When RMX2000 rebooted, unable to get access through RMX Manager. Check ping with signalling/control IP but no ping getting.

On RMX fron Panel MPM+ card all LEDs off and on Controller Section also all LEDs off.

Fan status and PWR status LED ok.

ABHIJEET
Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Unable to ping signalling or control IP of RMX2000

Hello @smanoj,

welcome back to the Polycom community.

Some or a couple of your old post(s) => here <= are still open / pending as you have not marked these as "Accept as a solution" or at least provided some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate ?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently.

 

For your new issue it is always useful to include the currently used Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2