Compatibility KIRK Server 600v3 and KIRK Server 6000 witch CUCM Cisco 9.X

Occasional Visitor

Compatibility KIRK Server 600v3 and KIRK Server 6000 witch CUCM Cisco 9.X

Hi to all! I have read the compatibility matrix of Kirk Wireless Server 600v3 server and kirk server 6000. I saw that the 600v3 is compatible in Skinny mode with version 8.0.2 of Cisco Call manager, while the 6000 is compatible with version 8.6.2 of Cisco Call Manager but in SIP mode. Is it correct? I would like to know if the kirk 600v3 server is compatible with the call manager cisco 9.X in SKINNY mode and which release of firmware it need on board. Then I would like to know if kirk server 6000 also works in Skinny and if it is compatible with the Cisco Call Manager 9.X. I have tried to search this info without success. Thanks a lot for the support.
Message 1 of 4
3 REPLIES
Polycom Employee & Community Manager

Re: Compatibility KIRK Server 600v3 and KIRK Server 6000 witch CUCM Cisco 9.X

Hello cmaiolani,

welcome to the Polycom Community.

 

Please be aware of the recent change outlined => here <=

 

SpectraLink KIRK is no longer a part of the Polycom brand.

 

Only the KWS600v3, which is no longer sold, was compatible with the proprietary Skinny protocol.

 

The KWS6000 is only compatible with the open SIP standard. I would contact SpektraLink KIRK directly to get this new CUCM version compatibility confirmed.

 

Best Regards

 

Steffen Baier

 

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Visitor

Re: Compatibility KIRK Server 600v3 and KIRK Server 6000 witch CUCM Cisco 9.X

Thanks Steffen for replay!

 

Ok for KIRK Server 6000, it is very clear and i'll wait for the compatibility info.

 

While for KIRK server 600v3, i know that it is in end of sale from some time, but i don't understand if it is compatible with cisco call manager 9.X.

 

Can you tell me if it is so or SpektraLink KIRK has also this info?

 

Thaks a lot!!

 

 

 

 

Message 3 of 4
Polycom Employee & Community Manager

Re: Compatibility KIRK Server 600v3 and KIRK Server 6000 witch CUCM Cisco 9.X

Hello cmaiolani,

 

SpectraLink KIRK would be doing the interoperability testing in order to provide the relevant support.

 

Please contact them directly.

 

Best Regards

 

Steffen Baier

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 4 of 4