we have a configuration problem with the following unit:
Version: 8.00 hotfix7 IP1200[80500.27], Bootcode, Hardware
Coder: 10 Channels of G.711,G.726,G.729,G.723
DECT Firmware: 14125500 PCS05Ag
We configurate the DECT Master a SIP Proxy to connect to a local VoIP PBX.
Incoming calls to the Dect handsets work fine. Both sides can hear and speak but on outcoming calls from the handsets both sides can't hear anything.
We would be happy about any kind of help or suggestions to solve this problem ...
I added a PDF to this message with some Screenshots of the configuration.
Many thanks and best regards
Solved! Go to Solution.
At a guess it sounds like a codec mismatch, firewall RTP ports not being opened or other such issue.
Are you able to post a wireshark trace of the 2 call types and I'll take a look at this.
many thank for offering me your help.
I did a wireshark trace and found the problem ... you were right it was a problem with the codec.
In the Standard framesize was set to 60ms but my PBX can only work with 30ms ... I changed the value ... know everything is working fine :-)
Maybe you could answer me another question:
Below the SIP Proxy configuration is a point LDAP Directory Search.
Is this for a global phone book search to on a LDAP Server?
Again many thanks
I'm pleased you solved your issue
Re LDAP server for a corporate directory.
I must admit it has been a few years since I looked at a KWS600v3 and was not aware it supported LDAP corporate directories which your screen suggests.
LDAP on the v3 was used to maintain a shared database of user info. It was used by the bases to see if a handset is authorised to use its resources.
The KWS6500, 6000, 400, 2500, 8000 all support LDAP phonebooks but your screen suggests it might have been implemented earlier in the product history? Give it a go - I have attached a doc on how to do this and how to use it on the handset for the KWS6000
to my knowledge this is used for internal users only. That part of the Software is from our Partner Innovaphone and we never had an official phone book support.
There was a JAVA MSF demo tool that replicated a phonebook using the MSF functionality browsing a txt file on a hard drive. Above was unfortunately never released to the public.
thanks for the information about innovaphone ... I found this on the innovaphone wiki:
LDAP Directory Search: If enabled and a LDAP server is configured, the IP-DECT Master does an LDAP directory look up for incoming calls. Shows up the callers name on the DECT phones. This settings are NOT used for Directory Search for outgoing calls from DECT handsets, instead settings on Reference9:DECT2/Config/Phone Book used for this.
So this seems to be a phonebook for only on direction: incoming calls.
There was a JAVA MSF demo tool that replicated a phonebook using the MSF functionality browsing a txt file on a hard drive.
Is it possible to get this demo tool ... sounds very interesting for replicating a phonebook.
it was not made public and SpectraLink KIRK are no longer part of Polycom.
If you have someone that can write code you can simply use the MSF functionality.
I would suggest your contact SpectraLink KIRK support directly.