Plantronics + Polycom. Now together as Poly Logo

Kirk 600v3 compatibility with CUCM 8.6 sccp

Occasional Visitor

Kirk 600v3 compatibility with CUCM 8.6 sccp



I am new to polycom. I am upgrading callmanager to 8.6 from 4.2.3 and it has SCCP phone based on KIRK 600v3. I would like to know whether these will be compatible with CUCM version 8.6. The existing version of code on KIRK 600v3 is  


Version SerialNo Coder SNTP Server Time Uptime
6.00 dvl-sr1 IP1200[07-60600.07], Bootcode[366], HW[30] 8192/32768
00-90-33-0f-22-1e (ee)
12 Channels of G.711,G.726,G.729,G.723
**.**.** **:**
354d  1h  8m  39s 


Firmware System ARI Frequency
14125500 PCS04Db

Please point me in right direction. Also if it needs an upgrade than from where to download new code and how to do.




Message 1 of 2
Polycom Employee & Community Manager

Re: Kirk 600v3 compatibility with CUCM 8.6 sccp

Hello Vinet,


welcome to the Polycom Community.


According to the whitelist => here <= the latest tested Version is CUCM 8.0.2


The Software you are currently running is rather old and you should check the KIRK KWS600v3 Page => here <=


Best Regards


Steffen Baier


Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2