CX3000: Can't reach via Web GUI

Occasional Visitor

CX3000: Can't reach via Web GUI

We've been unable to figure out how to access a CX3000 via the web GUI. (Also would like to know if there's an Administrator manual for this model).


The MAC is right, the IP has been assigned for over a year and it's pingable right now, but entering IP into IE brings up a dead page.


I should note that we have no issues accessing VVX600s using the same web method.


Thank you.

Message 1 of 2
Polycom Employee & Community Manager

Re: CX3000: Can't reach via Web GUI

Hello more

The answer to this is pretty simple. None of the Polycom Microsoft CX telephone products have a web interface.

Replied via mobile device
Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 2