Plantronics + Polycom. Now together as Poly Logo

Polycom CX5500 with external Speaker

Highlighted
Occasional Visitor

Polycom CX5500 with external Speaker

We are using a CX5000 and CX5500 in two large meeting rooms and the audio output from the built-in speaker isn't loud enough.

 

We can take the speaker audio from the Skype PC to external speakers to sort this, but then the camera follows the remote speaker and shows the screen of themselves talking. This isn't a nice effect.

 

Is there a way of getting this audio stream out of the CODEC unit so that it can be ignored in the same way that the in-buit speaker ignores teh remote audio?

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: Polycom CX5500 with external Speaker

Hello @DR32768 ,

welcome to the Polycom Community.

The rca aka phono outputs on the CX5500 hardware are not active and there are no plans to enable these.


To my knowledge there is no other way to do this.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2