Can you tell me how does RM 10.4 and DMA 9.0.1 know when to use a video or a phone license.?
If I have a gs device and I click the button to place a phone call will it use a video or a phone license for this device.?
So here is what I am thinking..
It seems that the voip cards would be considered phone sip devices and not video sip devices, and anytime a GS device changed the call switch from video to phone that also would be a phone call.
With RM 10.4 that separates video licenses and phone licenses that creates an issue for us because we are not licensed for phone.
Everything before this upgrade to 10.4 had phone and video using the same licensing pool.
What I have found out is the GS and HDX devices can place calls all day long, but every time I place a voip card call we get the fast busy tone.
I also do not complete phone calls through the gs device if I switch the call from video to phone.
welcome to the Polycom Community.
Most of the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition other details allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
It’s a Licensing question ONLY –
Using RM SW REV 10.4 and DMA SW REV 9.0.1
Everything before this upgrade to RM 10.4 had phone and video using the same licensing pool, now it doesn’t.
Do I now need to purchase phone licenses ?