CMA 4000 + GnuGK

[Anonymous]

I have a 3rd party Gatekeeper with proxy support (GnuGK 3.2). CMA 4000 (6.0.3) is configured to use it to route calls to outside world (route via H.323 SBC/ALG) When I register m100/CMAD on CMA and try to call outside, call routed to GnuGK failover site, if I call directly to it IP.

Also I have DMA 7000 (5.0) on same network and implement same sites and topology, like on CMA (with sites and site-links). After this i registered m100 on DMA and try to make outbound call. It works.

So, the question is, is it possible to register CMA desktops not on CMA, as GateKeeper, but on another, like DMA or GnuGK?

Is it bug on CMA?

[Mike_v1 · Accepted solution]

Samael,

is it possible to register CMA desktops not on CMA, as GateKeeper, but on another, like DMA or GnuGK?

Yes, you can do it trough the CMA Site Provisioning:

Admin > Dial Plan and Sites > Sites > Edit Site Provisioning Details > H.323 Settings > Use gatekeeper > Specify > Gatekeeper Address

WBR,

Mike

[Anonymous]

Yes, this works. Thanks you very much!