I couldn't access the interface of VBP-E. So, I reset the VBP-E by clicking the erase pin, 3 times. It should set the IP of port 1 to 192.168.1.1. I also changed the IP of my computer to 18.104.22.168/24.
When I enter 192.168.1.1 in my browser, it couldn't connect. I tried switching the browsers, rebooted the VBP-E but couldn't remote into it.
This device has only the ethernet port for the console, no DB-9.
Any suggestion will be appreciated.
I don't have the console cable that came with the box of VBP. I cannot ping 192.168.1.1 through port 1 as well.
I also tried using cross over and straight through Ethernet cables.
I will try to erase the configurations again and see if it works.
While setting the IP of my computer to 192.168.1.2/24, I left the default gateway and DNS empty. Could that be the problem?
Re-erased the VBP-E, changed the IP of my computer to 192.168.1.2/24, DNS: 22.214.171.124/126.96.36.199 and gateway:192.168.1.1. It worked. I can now remote into the unit.
Thanks for the help.