cancel
Showing results for 
Search instead for 
Did you mean: 

Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

SOLVED
Occasional Advisor

Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

I'm extremely new to RPRM, I just installed it last week and I have managed to get a phone to connect to it and I can see it in the Endpoint > Monitor View page but when I click its name so I can assign policies and such nothing happens. I can see the name is underlined and blue like a link but clicking it causes nothing to happen.  I have tried it in both Chrome and IE and neither works.

 

Since this is so new to me it could be completely my fault but I'm not sure why this particular step isn't working.

Message 1 of 6
5 REPLIES
Polycom Employee & Community Manager

Re: Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

Hello @Martin Palmer,

welcome to the Polycom Community.

It is always useful to include the currently used Software version as issues experienced or a question asked may already be addressed in a newer release.

 

Please provide this for the RPRM and the Trio in this case.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is usually stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

 

Its usually either Endpoint Group Association or Configuration Profile Association which can be assigned.

 

Its not super easy to explain this via the medium of a community forum as someone should have a basic understanding of the RPRM and how you assign these profiles etc.

 

Is this some proof of concept installation or have you got access to anyone from Polycom that could help you instead?

 

I have not yet had time to create an FAQ on this.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 6
Occasional Advisor

Re: Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

It's RPRM version 10.2 and it's not a Trio that I'm connecting to but a VVX 410 running UCS 5.5.1.15937

Message 3 of 6
Highlighted
Polycom Employee

Re: Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

Martin,

 

I had this recently happen to me while helping another customer. By default when you install RPRM, you log into as the admin user. But, by default, the admin does not have device admin rights. So you need to go under Users, edit the Admin user and add the device administrator role to the user. Then log out and back in. Now when you click the blue link, it will actually take you to the endpoint's manage portal. 

 

Why this has to be done is beyond me which is why I don't answer why questions. :)

 

S.

Message 4 of 6
Occasional Advisor

Re: Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

Thanks Simons.  This was exactly the issue I was having and you answer was the correct fix. This really doesn't seem logical as you'd believe the admin would have all rights, but who knows why.

 

Thanks again!

Message 5 of 6
Polycom Employee & Community Manager

Re: Clicking Endpoint Name (Endpoint > Monitor View) Does Nothing in RPRM

Hello @Martin Palmer,

I added a new FAQ. This is work in progress

 

Dec 06, 2017 Question: Is there an FAQ for RealPresence Resource Manager RPRM to provision Polycom phones?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 6 of 6