-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Video Conferencing
- Collaboration & Conferencing Platforms
- DMA , CMA and VBP-ST integration - Gatekeeper
Create an account on the HP Community to personalize your profile and ask a question
02-08-2013 01:56 AM
Hi,
We are deploying the UC infrastructure and want to use DMA as GK.
need your help in verifying the configuration
1. VBP-ST lan side gatekeeper : DMA iP is used a GK
2. in CMA local site : DMA IP is used as GK in provisioning settings
3. in RMX : DMA IP is used as GK
4. in CMA internet/VPN: site what should be used in provisioning setting for cmad. DMA internal IP, same server(CMA ) or vbp ST public interface ?
your help will be much appreciated.
Thanks,
Vikas
Solved! Go to Solution.
Accepted Solutions
02-08-2013 04:03 AM
1. VBP-ST lan side gatekeeper-CMA lan side ip
2. in CMA local site : DMA IP is used as GK in provisioning settings
3. in RMX : DMA IP is used as GK
4. in CMA internet/VPN: wan side ip of the vbp st(public ip)
5 use of DMA-for rmx pool and for load balancing
Regards
Yashpal
02-09-2013 08:41 PM
Vikas,
You are correct in every point except #4.
With the VBP-ST box, I assume you are using the Access Proxy feature. This will make any registered user look and act like an endpoint on your internal network. The DMA does not support this function of the VBP-ST. Therefore, you have to create a site which includes the LAN side of the VBP-ST and associate this site to the CMA managed terroritory. You would provision the CMA as the gatekeeper for this site. I would then make sure the CMA is neighbored to the DMA.
All of this is needed if you integrate the DMA with the CMA. If you don't integrate, then you can provision the DMA as the gatekeeper in previous mentioned site. Gatekeepers determine the area of control by the use of territories. Territories are defined by the sites. If you did not create a special site for the VBP-ST and assigned it to the CMA, then the DMA would see the registered endpoints coming in and would reject them as the primary gatekeeper would be the CMA for the territory. If you moved everything over to the DMA, the Access Proxy feature would not work correctly as the changes to internal Apache firewall rules would not get updated correctly like they should.
Good luck,
S.
02-09-2013 09:32 PM
Thanks simons,
please confirm if by integration of cma with dma you mean neighboring cma and dma gatekeeper. In integration menu of dma I get resource manager, exchange, ads and juniper only as i am on latest version of dma software.
regards
vikas
Didn't find what you were looking for? Ask the community