Has anyone done a script which strips the dial string and replaces it with a Custom number on the DMA.
I have a Provisioned environment with endpoints using AD credentials to register to the Polycom environment.
Ive setup a trust between the DMA and the Avaya Session Manager, with this I have configured Direct Dial in, which works.
I have also setup a dial rule to dial out by dialing a prefix and a number to be routed to the Avaya session manager and then out.
The problem I have is when I dial, my calls are getting routed correctly, but the Service provider is blocking the call as the Dial String has a Name (firstname.lastname@example.org) the service require digits.
When I manual register the endpoint using a number 123456789, they call gets routed and passed by the Service provider.
My question is,
is there a way that I can remove the 'yourname' and automatically replace it with a generic phone number, so when it gets sent to the Avaya session manager the calls gets approved without having to change every endpoint.