Plantronics + Polycom. Now together as Poly Logo

[FAQ] RPRM Polycom phone Provisioning guide

Polycom Employee & Community Manager

[FAQ] RPRM Polycom phone Provisioning guide

Hello all,


The objective of this short overview is to explain briefly how to setup a Polycom RealPresence ResourceManager 10.1 or later to support Polycom Phone provisioning.


A great video detailing this can be found => here <=


Or from a Polycom Employee Part 1, Part 2 and Part 3


NOTE: Please contact your Polycom reseller or Polycom Sales Engineer for a proof of concept and access to any ISO’s or OVA files or licenses required to set this up!


The Polycom RPRM supports Hyper-V or VMware or a physical Dell server.


  1. Install the ISO or OVA on your virtual Environment. Once installed access the console to setup the RPRM Network Credentials
    The Username is: polycom
    The Password is: polycom

  2. Enter the network Credentials to match you environment and after this the RPRM will re-start

  3. Wait about 10 Minutes and then browse to the IP or FQDN of the RPRM

    The standard initial username is: admin
    The standard initial password is: Polycom12#$

    You will get prompted to change this to something more secure

  4. Initially the admin user does not have the right to audit Polycom phones so you either need to create a new user or add this to the admin user.

    Browse to User > Users and either select the admin user or create a new user.

    Now assign the Role of a Device Administrator to the user.


    You can also integrate RPRM into Active Directory but this is outside the scope of this FAQ.

  5. Any license would need to be added here:


  6. The next step would be to assign a site(s) in order to create separate sites to match the environment.


    The above expects a Site Name, a Description and a Location.

    In addition define the Subnet


    If this would not be defined the RPRM adds everything into the Internet / VPN

  7. The RPRM uses PlcmSpIp as the standard User Name and Password. This can be changed here:


  8. Usually after this initial setup you can either import new endpoints via Endpoint > Monitor View > More Import/Export Audio Phones and/or automatically add the phones whilst using a DHCP scope as shown => here <= in detail.

    The DHCP Option 66/160/161 FQDN or IP for the RPRM is 

    http://FQDN or IP Address/phoneservice/configfiles/


Note: In order to use HTTPS please add a certificate to the RPRM or disable Common Name Validation on the Phone end. Polycom Phones out of the box automatically trust the Certificates listed in the Certificate Updates documents posted regularly => here <=. The phone could initially be provisioned via HTTP and then once it loads its configuration via the RPRM a certificate for HTTPS could be provisioned.


Option 1:


  • Importing all phones via a CSV File:


    The format of the CVS file is defined in the instructions which you can see above. You can in addition simply export a file and use this as a template.


    Devices can be imported and re-imported to change associated groups in bulk without changing other configurations.

    The advantage of this is all phones would already be setup with their registration details and utilize the DHCP Option.

Option 2:


  • Manually providing the RPRM details via the Phones Web Interface


Once the phone is connected to the RPRM provisioning Server the Web Interface or Admin Password for the Phone changes to 789.

This can be changed by browsing to Endpoint > Phone Management > Configuration Profile and copying the AdminPassword-ProvisioningDefault.




This would then be required to be assigned to a Global Configuration within Endpoint > Phone Management > Profiles Deployment. 


Added phone(s) can now be found via Endpoint > Monitor View




Selecting an individual phone:




Will provide access and details to configuration used or log files:




  • The actual configuration for the phone(s) is split into Global, Endoint Groups, Endpoint Models, Sites or Endpoints


  • Usually the Global section would only be used for a general common configuration like a password (as explained above) or a background Image.

  • Using the Endpoint Groups as an example we can add and Group certain Endpoints together. In the below example we used a VVX500


    We call this new group VVX500 Endpoint Group


    And we associate this:


    This results in a new group


  • Browsing to Endpoint > Phone Management > Configuration Profiles you can either Create a new profile / configuration (blue) or modify an existing one (red) once it is selected


    Either create and define what this profile does or change the name provided if cloned


    The options for editing or changing this vary


    You can simply start typing / searching for a parameter(s)


    or paste from an previous XML file



Software Updates via RPRM


Via Endpoint > Phone Management > Upload Software Updates Software can be added.




Usually you would select the Polycom hosted Server and create a new configuration profile based on the software version as this allows you to assign this to a existing or new configuration profile via Endpoint > Phone Management > Configuration Profiles



Apply versus OK


Throughout the application you will see Apply and OK appear in regards to Configuration Profiles and Group Memberships.


RPRM_Provisioning_27.PNG Will save the changes and devices that are impacted of the changes will be notified at the next polling period for the affected devices.


RPRM_Provisioning_28.PNGWill Save the changes and immediately notify all devices that are reachable that there are changes that need to be applied immediately.A Pop-up notification is provided to confirm this action as it will generally always reboot the phone(s). Always be aware of your context when applying changes


Automatic Updates


As a factory default when provisioning a Polycom phone from RPRM the Phone will check daily between 03:00 and 05:00 for any configuration changes.


In order to change this you would copy Provisioning-Polling-Daily-SpecificWindow within Endpoint > Phone Management > Configuration Profiles and change the time to suit your setup and then assign to a profile.


Endpoint Monitor – Device Status





Troubleshooting Tools


Via Admin > Maintenance > Troubleshooting Utilities several Troubleshooting Options are available




  • Restart > Restart the RPRM

  • Shutdown > Shut down the RPRM

  • Traces > This enable the user to start a Trace and store this in the System Log File. Please be aware that this is a Network capture as shown => here <=


  • Resource Manager System Logs > Get the full set of Resource Manager logs and any traces

  • Resource Manager System Report > Generate and download Resource Manager System Report.

  • Test Network Connection > Troubleshoot network issues using the traceroute and ping programs. This includes a PING or Traceroute


  • View UC Management Log > View UC Management Log



Advanced Functions – Global/Model/Site



Reboot Phones – All phones within the selected scope will be rebooted as long as they are not isolated behind a NAT’d device.

<==== Signature / Disclaimer ======>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 1 of 1