I've been looking in the available doc even in my course guide but could not find how to send external guest calls with only IP-address to an EQ via the RPAD.
All other calls are working fine, i.e. firstname.lastname@example.org for which I've used ACL for SIP and H.323.
But calls to the public IP-address of the RPAD are refused by the RPAD.
I could not find how to configure an ACL to catch these type of calls and direct them to an EQ on DMA or RMX.
your wish still not clear to me.
What standrad VC call you want to get dial in SIP or H.323?
I just want to be able to call from a H.323 endpoint, located on the Internet, to the public IP of my RPAD and then end up in an EQ of the RMX from where I can then enter the conference id I want to join.
What RPAD software do you have?
You can use H.323 default policy and .
Please take a look at >>RPAD Administrator’s Guide 4.0<<
p. 71 "Enable H.323 default policy"
You can not set up EQ for RPAD public IP,you have only whay to get connect in conference publicip##MCU preffix+Meeting room id(example 220.127.116.11##823434 where 18.104.22.168 is public ip of RPAD,82 is prefix of MCU in GK and 3434 is meeting room id of MCU)