Plantronics + Polycom. Now together as Poly Logo

I can´t log in on new RSS 4000

Highlighted
Occasional Contributor

I can´t log in on new RSS 4000

Hi,

I am implementing a new RSS 4000, but I can into on the default IP Address nad also I can into to the console, someone can help  me, how I can restore to factory default the RSS 4000 without can into.

Regards.

Message 1 of 4
3 REPLIES 3
Highlighted
Occasional Advisor

Re: I can´t log in on new RSS 4000

Hi,

 

You should read pages 117, 121 of Polycom RSS 4000System User Guide

 

To connect with Telnet:

1 Click the Start button. Type cmd in the search box.

2 Type telnet at the command prompt, followed by the IP address of your

RSS 8.5 system.

 

If you have completed all the above configurations and launched the terminal

simulation software successfully, press the Enter key. The login interface

appears.

The login interface shows all of the software information and you’ll be

prompted to enter the login password. Enter the login password and press the

Enter key.

If you entered a wrong password, you may be required to re-login to the

system.

If you entered the right password, you are brought directly to the command

setting interface.

 

Resetting Password

Type reset password after the prompt # to restore the administrator user

password for Web login to the default password (admin).

The system will show the prompt message

Are you sure?. Type Y to proceed

Message 2 of 4
Highlighted
Occasional Contributor

Re: I can´t log in on new RSS 4000

Dear All,

 

I did the above procedure but no luck and please advice if there are any other options.

 

Thanks !

Message 3 of 4
Highlighted
Occasional Visitor

Re: I can´t log in on new RSS 4000

Hi Team

 

Same issue facing by me as the RSS 4000 powering on but unable to access as don't knwo the IP address for the same.

 

Could anyone help me on this or any tool to retrive the IP addess to access the RSS.

 

Regards

Bose

Message 4 of 4