Plantronics + Polycom. Now together as Poly Logo

Internet Calling issue

Advisor

Internet Calling issue

Dear All,

 

Required pointers....

 

Scenario:

 

RPRM

DMA

RPAD

RPCS

 

Endpoint provisioned internally and over the internet.

 

661032 - Endpoint in the network

661033 - End point in the internet

 

Calls from 661032 to 661033 is working

Calls from 661032 to 661033 is not working.

 

DMA IP - 10.1.1.12

RPAD LAN - 10.1.1.14

RPAD WAN - 10.1.1.15

 

Means calls from EP in the internal network to the EP in the internet on the E.164 is not working.

 

Basic configurations of RPAD and DMA is in tact. Sites are created with site links to internet.

Observation is  Calls made from the internal network is routed to RPAD LAN leg by DMA , but RPAD LAN legs instead of sending the traffic to RPAD WAN leg it sends it back to DMA. , please find the attached call signalling snaps .

Regards,

Sreejith K T
2 REPLIES 2
Advisor

Re: Internet Calling issue

Hi All,

 

Any pointers to this will be much appreciated.

 

Regards,

Sree.

Regards,

Sreejith K T
Message 2 of 3
Polycom Employee & Community Manager

Re: Internet Calling issue

Hello Sreejith,

welcome back to the Polycom Community.

Could I kindly ask you not to "bump" posts?

 

If someone has an answer for you they will answer. If this is urgent please open a support ticket via your Polycom reseller.


Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 3 of 3