cancel
Showing results for 
Search instead for 
Did you mean: 

RPAD with multiple relay or public address

Highlighted
Visitor

RPAD with multiple relay or public address

Hi ,

 

I dont know that i can meant my problem on topic.

 

We set up vc systems with polycom devices.

RPCS RPRM RPAD DMA etc.

 

RPAD has an ip address : 192.168.10.115

This ip address mapped on firewall a public address.

But we have some mpls networks from outside of our networks.

they want to call us via these mpls networks via rpad.

We set up some setting

  • We mapped new ip address on another firewall 192.168.10.115 -> 10.203.0.115
  • We want to send to call for seperated networks to seperated ip address.

I added schema as an attacment.

Best regards.

 

1 REPLY
Polycom Employee

Re: RPAD with multiple relay or public address

hi Aydinmu,

 

Not sure of the entire set of requirements you have as part of this solution . However it appears the RPAD is supposed to sit  between 2  firewalls with multiple external networks( Internet & MPLS) .A solution I could suggest is to have a "DMZ Deployment with One or More Network Interfaces" i.e. if the RPAD has atleast 2 network interfaces deployed in the Enterprise DMZ then both signaling and media services can be assigned to different interfaces for internal and external call flows . In this way you can keep the solution simple . Also you can assign upto 4 external proxy IP addresses . There is also a table you can fill out to map the external and internal signalling and media .  

 

Please refer to Page number 67 for the configuration details:
https://support.polycom.com/global/documents/support/setup_maintenance/products/network/rpad_3_1_dep...

Hope this helps!

Regards,
Karthik Sivaram

Please remember to "Kudo" a post that helped you and / or "Accept as Solution" if it solves your issue.

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.

Polycom employee participation within this community is not mandatory and any post or article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 2