Plantronics + Polycom. Now together as Poly Logo

RPRM VisualPro Provisioning

SOLVED
Highlighted
Occasional Visitor

RPRM VisualPro Provisioning

Wondering if this is possible,  I have tried to figure this out myself with no luck.  We are provisioning Trio's with RPRM.  We also do this with GroupSeries.  When we provision a Trio with a Visual+, the Visual+ will upgrade itself with the Trio firmware as specified in the configuration profile.  Can we do the same thing with VisualPro, have the GS upgrade to the lastest firmware with a configuration profile?

Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: RPRM VisualPro Provisioning

Hello @wastedtime9 ,

 

welcome to the Poly Community.


From the RPRM Admin Guide >here<

 

In addition:

 

  1. When Trio and GroupSeries are paired, you can configure Trio with the GroupSeries software to uprade to.   The Trio will store the parameter and will be passed to GroupSeries during a reboot, repair or change to the following parameter. 

 

mr.deviceMgmt.vc2.param.softwareUpdateUri="https://10.228.9.127/download/AndroidRepositories/groupSeries/Beta-6.1.8-430263/"

 

  1. If you need to replace the internal IP 10.228.9.127 with an external routable FQDN, use the following parameter:

mr.devicemgmt.vc2.param.software.UpdateProxyServer=“rprm.polycom-mslab03.com”


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
3 REPLIES 3
Highlighted
Polycom Employee & Community Manager

Re: RPRM VisualPro Provisioning

Hello @wastedtime9 ,

 

welcome to the Poly Community.


From the RPRM Admin Guide >here<

 

In addition:

 

  1. When Trio and GroupSeries are paired, you can configure Trio with the GroupSeries software to uprade to.   The Trio will store the parameter and will be passed to GroupSeries during a reboot, repair or change to the following parameter. 

 

mr.deviceMgmt.vc2.param.softwareUpdateUri="https://10.228.9.127/download/AndroidRepositories/groupSeries/Beta-6.1.8-430263/"

 

  1. If you need to replace the internal IP 10.228.9.127 with an external routable FQDN, use the following parameter:

mr.devicemgmt.vc2.param.software.UpdateProxyServer=“rprm.polycom-mslab03.com”


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
Highlighted
Occasional Contributor

Re: RPRM VisualPro Provisioning

Hi,

 

What about the other settings like 802.1x credentials, admin password,... ?

 

Is it possible to configure the RPG in Visualpro mode to get it from the Trio ? Like it's done with a Visual+.

 

Best regards,

 

Cyrille

Message 3 of 4
Highlighted
Occasional Visitor

Re: RPRM VisualPro Provisioning

Any further updates on this? Will the next version of RPRM officially support VisualPro as an Endpoint Type like the VisualPlus?

Message 4 of 4