Plantronics + Polycom. Now together as Poly Logo

RPRM VisualPro Provisioning

SOLVED
Occasional Visitor

RPRM VisualPro Provisioning

Wondering if this is possible,  I have tried to figure this out myself with no luck.  We are provisioning Trio's with RPRM.  We also do this with GroupSeries.  When we provision a Trio with a Visual+, the Visual+ will upgrade itself with the Trio firmware as specified in the configuration profile.  Can we do the same thing with VisualPro, have the GS upgrade to the lastest firmware with a configuration profile?

Message 1 of 4
3 REPLIES 3
Polycom Employee & Community Manager

Re: RPRM VisualPro Provisioning

Hello @wastedtime9 ,

 

welcome to the Poly Community.


From the RPRM Admin Guide >here<

 

In addition:

 

  1. When Trio and GroupSeries are paired, you can configure Trio with the GroupSeries software to uprade to.   The Trio will store the parameter and will be passed to GroupSeries during a reboot, repair or change to the following parameter. 

 

mr.deviceMgmt.vc2.param.softwareUpdateUri="https://10.228.9.127/download/AndroidRepositories/groupSeries/Beta-6.1.8-430263/"

 

  1. If you need to replace the internal IP 10.228.9.127 with an external routable FQDN, use the following parameter:

mr.devicemgmt.vc2.param.software.UpdateProxyServer=“rprm.polycom-mslab03.com”


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Contributor

Re: RPRM VisualPro Provisioning

Hi,

 

What about the other settings like 802.1x credentials, admin password,... ?

 

Is it possible to configure the RPG in Visualpro mode to get it from the Trio ? Like it's done with a Visual+.

 

Best regards,

 

Cyrille

Message 3 of 4
Occasional Visitor

Re: RPRM VisualPro Provisioning

Any further updates on this? Will the next version of RPRM officially support VisualPro as an Endpoint Type like the VisualPlus?

Message 4 of 4