Plantronics + Polycom. Now together as Poly Logo

Unable to establish point to point video call

tirthasarathi
Occasional Advisor

Unable to establish point to point video call

Hi

 

Unable to establish point to point video call between HDX, after gatekeeper registration on CMA 4000. Previously it was working fine.  But after registering the gatekeeper with End point, multipoint video conferencing through RMX 2000 working fine, point to point not. Please provide me the solution

 

tirtha

Message 1 of 2
1 REPLY 1
Mike_v
Honored Contributor

Re: Unable to establish point to point video call

Take a look >>> here <<<, it may be your case.

 

WBR,

Mike

WBR,
Mike
--------------------------------------------
“Reports that say that something hasn't happened are always interesting to me, because as we know, there are known knowns; there are things we know we know. We also know there are known unknowns; that is to say we know there are some things we do not know. But there are also unknown unknowns- the ones we don't know we don't know.”
― Donald Rumsfeld
Message 2 of 2