unable to call from intranet to Internet through VBP 5300E

[tirthasarathi]

sir,

please confirm me the attach configuration is right for nat?

or any change is require?

thanks

tirtha sarathi

[GaryMiyakawa]

That does not look correct.  Are you certain this is a VBP -5300E ?  

At this point, I think you need to be in contact with the reseller that sold you the product and ask them for some support.

Good luck,

Gary M

[tirthasarathi]

sir

no message r there

[tirthasarathi]

O...god!!

[tirthasarathi]

yes sir,

it shows

System

Help

Software Version: Version 9.1.5.3 -- Tue Aug 31 13:41:13 PDT 2010 Hostname: V2IU Model: Polycom 5300LF-E10 Vendor: Polycom

[GaryMiyakawa]

That is VERY old code (from 2009)...  You might want to upgrade it (assuming it's correctly connected to the internet)...  

That would make the fields much easier to setup. 

Once that is done, I think it will be more obvious how to setup the port forwarding...  Just remember that you are forwarding one port (not ALL ports) from the WAN side to the LAN side.   Your previous example was forwarding everything... 

Gary M

[fds]

hello, I found a issue when configure port forwaring in VPB-E, even I configured, but when access from IE http:// Wan-ipaddress:src-port, but it always cannot forward it to http:// Lan-Ipaddress:dst-port . Any one have idea, or consideration in there?